X-kote Paint renewal systems inc. · 410-2963 Glen Drive, Coquitlam, BC V3B 2P7 (2024)

FAQs

How long does X kote last? ›

Xkote is a permanent coating just like the factory coating. It will wear and tear the same as any factory clear coat, and last just as long.

The clear coat is a layer of transparent paint used to protect the color coat and primer coat of paint from UV rays, oxidation, and damage from harmful contaminants such as acid rain, road tar, road salt and even bird droppings. A high-gloss clear coat also provides your paint with some glassiness.

Longevity of PPF is realistically around 5 to 7 years depending on driving conditions, wear and tear, and the method of care. The Self-Healing properties will diminish over time. It's just natural, due to wear and tear.

The initial painting cost is relatively low compared to thermal spray coating. However, the painted surface might not last more than five years before needing a repaint. On the other hand, thermal spray coating has a relatively high initial cost; however, it can last more than 20 years.

Likewise, waxing your car isn't a restorative measure, but car wax does help to protect your car's paint finish after you've corrected it.

Use an orbital polisher in two steps. First, use a light-abrasive polish to get rid of the heavy oxidation. Follow the light-abrasive polish with a finishing polish to get a glossy finish. Consult the instruction manual to learn which speed setting is appropriate for your vehicle.

While there are some cases where clear coating may not be necessary, in most cases it's recommended for optimal protection and aesthetic appeal. With the right application techniques, you can easily apply a clear coat over spray paint to ensure that your project looks its best for a long time to come.

Clear Coat Provides Valuable Body Protection

This outermost layer of transparent paint serves as a protective barrier that prevents UV radiation and weather from damaging the colored paint layer. Clear coat also takes abrasions that might otherwise scratch your paint job.

Quick Steps to How To Apply Clearcoat:

Make sure the can is close to a temperature of 80 degrees Fahrenheit. Practice and prep, clean the area after wet sanding. Practice spraying clearcoat on cardboard to get used to spraying. Use masking tape and something like newspaper to cover the surrounding area.

What grit sandpaper to Reclear? ›

You have two options for sanding: you can start with the courser grit sandpaper (between 600-800 grit), or you can go straight to the fine-grit sandpaper (between 1,200-2,000 grit). Tip: For optimum results, you will want to start with a courser grit, and finish with the fine grit.

Painting over an automotive clear coat will leave to subpar paint job since the paint cannot adequately adhere to the surface. Fortunately, you do not have to remove the entire layer of clear coat to repaint your car. If your car has a clear coat, simply scuff the area you want to paint.

Take advantage of Diamond Kote NanoCeramic's 10-year guarantee, providing you with indefinite protection and a one-time application.

A minimum of 12 hours for CanCoat is recommended (24 hours for certainty) of avoiding moisture. Proper cure time for most coatings also means not washing the car for a week.

The clear coat rejuvenates the paint giving it a natural sheen, protecting it from harmful environmental factors that cause wear and tear and saves the paint from scratches. The clear coat drying time on cars is about 12 to 48 hours. That said the paint takes around 30 days to get fully cured.

The coating will last for multiple years, depending on how you take care of the vehicle. The best way to do that is to bucket wash it once a week.